Service area
Where we work
From the Docklands waterfront we cover the neighbouring inner-west and city-edge suburbs.
- Melbourne
- West Melbourne
- North Melbourne
- Southbank
- South Wharf
- Port Melbourne
- Kensington
- Footscray
- South Melbourne
Internal bathrooms and laundries without windows depend on exhaust fans. When those fans and ducts clog, steam lingers and mould can follow. We clean exhaust grilles, fans and accessible duct sections to help moisture leave the apartment properly.
Many apartment bathrooms and laundries have no window at all. Every hot shower and every load in the dryer relies on an exhaust fan in the ceiling to draw moist air out through a duct and away from the apartment. When lint, dust and fluff build up on the grille, the fan blades and inside the duct, the fan can still sound busy while moving surprisingly little air. Steam then hangs around, mirrors stay fogged, and mould starts appearing on the ceiling, grout and silicone.
We remove the exhaust grille and clean it, then clean the fan housing and blades, which often carry a thick, sticky layer of lint. Where the duct connected to the fan is accessible, we brush and vacuum the reachable section under extraction. Laundry exhausts get particular attention, because dryer lint is light and builds up fast. Once reassembled, we check the fan is pulling air by holding a tissue to the grille, a simple test you can repeat yourself every few months to make sure it is still working well.
In high-rise buildings the exhaust duct often joins a shared riser that runs through the building to a roof fan. That riser is managed by the owners corporation, and we do not work on it without their approval. If your exhaust still seems weak after cleaning, we will let you know the problem may lie further along the shared system.
A clogged grille or fan, or a blocked duct, can leave the fan running but barely extracting. Running the fan for too short a time after showering also lets steam linger. Cleaning restores airflow where the blockage is within reach, and leaving the fan on for a while after each shower helps.
We clean the existing fan and check that it runs. If it is worn out, rattling or not spinning at full speed, we will point it out. Replacing a fan involves electrical work, so that needs to be done by an electrician or your building's maintenance contractor.
Tell us a little about your system and we will come back to you with a free quote.
How it works
Let us know the building, floor, system type and where the indoor unit sits. We use that to prepare a free quote and plan access.
We check lift booking, parking and sign-in requirements with you or the building manager so the visit runs smoothly on the day.
Outlets are sealed, surfaces covered and the system cleaned with brushes and HEPA extraction, working from the indoor unit out to each room.
We refit outlets, run the system, confirm airflow in every room and leave the apartment clean and ready for you to use.
Service area
From the Docklands waterfront we cover the neighbouring inner-west and city-edge suburbs.
Send us a few details about your apartment or office, and we will reply with a free quote and the next available times.
